病床通報實作指引
0.1.0 - CI Build

病床通報實作指引 - Local Development build (v0.1.0). See the Directory of published versions

Logical Model: BedCapacityModel - Detailed Descriptions

Active as of 2023-04-15

Definitions for the BedCapacityModel logical model.

Guidance on how to interpret the contents of this table can be found here.

1. BedCapacityModel
Definition

此邏輯性資料模型參考臺灣衛生福利部疾病管制署(Taiwan Centers for Disease Control,CDC)病床通報作業中的資料項目,實作者可藉此資料模型快速瞭解病床統計資料的內容,
但受限於FHIR的資料項目命名原則字首只能小寫及名稱不能包含特殊符號,命名無法完整參照原始資料項目名稱。若實作者已採用CDC病床通報作業中的資料項目,請留意名稱在此資料模型的差異及原因。
實作者可透過此資料模型上方Mappings功能頁籤來瞭解各資料項目可透過哪些Profiles或Resources的資料項目進行實作。

Control0..?
2. BedCapacityModel.dataId
Definition

資料識別碼,格式為「[機構代碼]_[資料日期]」,如:0622020017-20230401

Control1..1
Typestring
3. BedCapacityModel.hospNo
Definition

醫院代碼

Control1..1
TypeOrganization
4. BedCapacityModel.inpDate
Definition

資料日期

Control1..1
Typedate
5. BedCapacityModel.p
Definition

負壓床

Control1..1
TypeBackboneElement
6. BedCapacityModel.p.curUsingPTP
Definition

使用中負壓床-結核病-確定

Control1..1
Typeinteger
7. BedCapacityModel.p.curUsingPTS
Definition

使用中負壓床-結核病-疑似

Control1..1
Typeinteger
8. BedCapacityModel.p.curUsingPCP
Definition

使用中負壓床-新型流感-確定

Control1..1
Typeinteger
9. BedCapacityModel.p.curUsingPCS
Definition

使用中負壓床-新型流感-疑似

Control1..1
Typeinteger
10. BedCapacityModel.p.curUsingPNS
Definition

使用中負壓床-其他

Control1..1
Typeinteger
11. BedCapacityModel.p.rsvP
Definition

控留-負壓隔離病床

Control1..1
Typeinteger
12. BedCapacityModel.p.availP
Definition

可供使用-負壓隔離病床

Control1..1
Typeinteger
13. BedCapacityModel.n
Definition

一般隔離床

Control1..1
TypeBackboneElement
14. BedCapacityModel.n.curUsingNTP
Definition

使用中一般隔離床-結核病-確定

Control1..1
Typeinteger
15. BedCapacityModel.n.curUsingNTS
Definition

使用中一般隔離床-結核病-疑似

Control1..1
Typeinteger
16. BedCapacityModel.n.curUsingNCP
Definition

使用中一般隔離床-新型流感-確定

Control1..1
Typeinteger
17. BedCapacityModel.n.curUsingNCS
Definition

使用中一般隔離床-新型流感-疑似

Control1..1
Typeinteger
18. BedCapacityModel.n.curUsingNNS
Definition

使用中一般隔離床-其他

Control1..1
Typeinteger
19. BedCapacityModel.n.rsvN
Definition

控留-一般隔離病床

Control1..1
Typeinteger
20. BedCapacityModel.n.availN
Definition

可供使用-一般隔離病床

Control1..1
Typeinteger
21. BedCapacityModel.s
Definition

專責病床

Control0..1
TypeBackboneElement
22. BedCapacityModel.s.curUsingSTP
Definition

使用中專責病床-結核病-確定

Control1..1
Typeinteger
23. BedCapacityModel.s.curUsingSTS
Definition

使用中專責病床-結核病-疑似

Control1..1
Typeinteger
24. BedCapacityModel.s.curUsingSCP
Definition

使用中專責病床-新型流感-確定

Control1..1
Typeinteger
25. BedCapacityModel.s.curUsingSCS
Definition

使用中專責病床-新型流感-疑似

Control1..1
Typeinteger
26. BedCapacityModel.s.curUsingSNS
Definition

使用中專責病床-其他

Control1..1
Typeinteger
27. BedCapacityModel.s.rsvS
Definition

控留-專責病床

Control1..1
Typeinteger
28. BedCapacityModel.s.availS
Definition

可供使用-專責病床

Control1..1
Typeinteger
29. BedCapacityModel.icu
Definition

加護病房

Control0..1
TypeBackboneElement
30. BedCapacityModel.icu.curUsingICUTP
Definition

使用中加護病房-結核病-確定

Control1..1
Typeinteger
31. BedCapacityModel.icu.curUsingICUTS
Definition

使用中加護病房-結核病-疑似

Control1..1
Typeinteger
32. BedCapacityModel.icu.curUsingICUCP
Definition

使用中加護病房-新型流感-確定

Control1..1
Typeinteger
33. BedCapacityModel.icu.curUsingICUCS
Definition

使用中加護病房-新型流感-疑似

Control1..1
Typeinteger
34. BedCapacityModel.icu.curUsingICUNS
Definition

使用中加護病房-其他

Control1..1
Typeinteger
35. BedCapacityModel.icu.rsvICU
Definition

控留-加護病房

Control1..1
Typeinteger
36. BedCapacityModel.icu.availICU
Definition

可供使用-加護病房

Control1..1
Typeinteger
37. BedCapacityModel.note
Definition

備註說明

Control0..1
TypeNarrative
38. BedCapacityModel.lastUpdate
Definition

上傳日期時間

Control1..1
Typedate
39. BedCapacityModel.prsnId
Definition

上傳者

Control1..1
TypePractitioner

Guidance on how to interpret the contents of this table can be found here.

1. BedCapacityModel
Definition

此邏輯性資料模型參考臺灣衛生福利部疾病管制署(Taiwan Centers for Disease Control,CDC)病床通報作業中的資料項目,實作者可藉此資料模型快速瞭解病床統計資料的內容,
但受限於FHIR的資料項目命名原則字首只能小寫及名稱不能包含特殊符號,命名無法完整參照原始資料項目名稱。若實作者已採用CDC病床通報作業中的資料項目,請留意名稱在此資料模型的差異及原因。
實作者可透過此資料模型上方Mappings功能頁籤來瞭解各資料項目可透過哪些Profiles或Resources的資料項目進行實作。

Control0..*
2. BedCapacityModel.dataId
Definition

資料識別碼,格式為「[機構代碼]_[資料日期]」,如:0622020017-20230401

Control1..1
Typestring
3. BedCapacityModel.hospNo
Definition

醫院代碼

Control1..1
TypeOrganization
4. BedCapacityModel.inpDate
Definition

資料日期

Control1..1
Typedate
5. BedCapacityModel.p
Definition

負壓床

Control1..1
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. BedCapacityModel.p.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
7. BedCapacityModel.p.curUsingPTP
Definition

使用中負壓床-結核病-確定

Control1..1
Typeinteger
8. BedCapacityModel.p.curUsingPTS
Definition

使用中負壓床-結核病-疑似

Control1..1
Typeinteger
9. BedCapacityModel.p.curUsingPCP
Definition

使用中負壓床-新型流感-確定

Control1..1
Typeinteger
10. BedCapacityModel.p.curUsingPCS
Definition

使用中負壓床-新型流感-疑似

Control1..1
Typeinteger
11. BedCapacityModel.p.curUsingPNS
Definition

使用中負壓床-其他

Control1..1
Typeinteger
12. BedCapacityModel.p.rsvP
Definition

控留-負壓隔離病床

Control1..1
Typeinteger
13. BedCapacityModel.p.availP
Definition

可供使用-負壓隔離病床

Control1..1
Typeinteger
14. BedCapacityModel.n
Definition

一般隔離床

Control1..1
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. BedCapacityModel.n.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
16. BedCapacityModel.n.curUsingNTP
Definition

使用中一般隔離床-結核病-確定

Control1..1
Typeinteger
17. BedCapacityModel.n.curUsingNTS
Definition

使用中一般隔離床-結核病-疑似

Control1..1
Typeinteger
18. BedCapacityModel.n.curUsingNCP
Definition

使用中一般隔離床-新型流感-確定

Control1..1
Typeinteger
19. BedCapacityModel.n.curUsingNCS
Definition

使用中一般隔離床-新型流感-疑似

Control1..1
Typeinteger
20. BedCapacityModel.n.curUsingNNS
Definition

使用中一般隔離床-其他

Control1..1
Typeinteger
21. BedCapacityModel.n.rsvN
Definition

控留-一般隔離病床

Control1..1
Typeinteger
22. BedCapacityModel.n.availN
Definition

可供使用-一般隔離病床

Control1..1
Typeinteger
23. BedCapacityModel.s
Definition

專責病床

Control0..1
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. BedCapacityModel.s.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
25. BedCapacityModel.s.curUsingSTP
Definition

使用中專責病床-結核病-確定

Control1..1
Typeinteger
26. BedCapacityModel.s.curUsingSTS
Definition

使用中專責病床-結核病-疑似

Control1..1
Typeinteger
27. BedCapacityModel.s.curUsingSCP
Definition

使用中專責病床-新型流感-確定

Control1..1
Typeinteger
28. BedCapacityModel.s.curUsingSCS
Definition

使用中專責病床-新型流感-疑似

Control1..1
Typeinteger
29. BedCapacityModel.s.curUsingSNS
Definition

使用中專責病床-其他

Control1..1
Typeinteger
30. BedCapacityModel.s.rsvS
Definition

控留-專責病床

Control1..1
Typeinteger
31. BedCapacityModel.s.availS
Definition

可供使用-專責病床

Control1..1
Typeinteger
32. BedCapacityModel.icu
Definition

加護病房

Control0..1
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
33. BedCapacityModel.icu.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
34. BedCapacityModel.icu.curUsingICUTP
Definition

使用中加護病房-結核病-確定

Control1..1
Typeinteger
35. BedCapacityModel.icu.curUsingICUTS
Definition

使用中加護病房-結核病-疑似

Control1..1
Typeinteger
36. BedCapacityModel.icu.curUsingICUCP
Definition

使用中加護病房-新型流感-確定

Control1..1
Typeinteger
37. BedCapacityModel.icu.curUsingICUCS
Definition

使用中加護病房-新型流感-疑似

Control1..1
Typeinteger
38. BedCapacityModel.icu.curUsingICUNS
Definition

使用中加護病房-其他

Control1..1
Typeinteger
39. BedCapacityModel.icu.rsvICU
Definition

控留-加護病房

Control1..1
Typeinteger
40. BedCapacityModel.icu.availICU
Definition

可供使用-加護病房

Control1..1
Typeinteger
41. BedCapacityModel.note
Definition

備註說明

Control0..1
TypeNarrative
42. BedCapacityModel.lastUpdate
Definition

上傳日期時間

Control1..1
Typedate
43. BedCapacityModel.prsnId
Definition

上傳者

Control1..1
TypePractitioner

Guidance on how to interpret the contents of this table can be found here.

1. BedCapacityModel
Definition

此邏輯性資料模型參考臺灣衛生福利部疾病管制署(Taiwan Centers for Disease Control,CDC)病床通報作業中的資料項目,實作者可藉此資料模型快速瞭解病床統計資料的內容,
但受限於FHIR的資料項目命名原則字首只能小寫及名稱不能包含特殊符號,命名無法完整參照原始資料項目名稱。若實作者已採用CDC病床通報作業中的資料項目,請留意名稱在此資料模型的差異及原因。
實作者可透過此資料模型上方Mappings功能頁籤來瞭解各資料項目可透過哪些Profiles或Resources的資料項目進行實作。

Control0..*
2. BedCapacityModel.dataId
Definition

資料識別碼,格式為「[機構代碼]_[資料日期]」,如:0622020017-20230401

Control1..1
Typestring
3. BedCapacityModel.hospNo
Definition

醫院代碼

Control1..1
TypeOrganization
4. BedCapacityModel.inpDate
Definition

資料日期

Control1..1
Typedate
5. BedCapacityModel.p
Definition

負壓床

Control1..1
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. BedCapacityModel.p.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
7. BedCapacityModel.p.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on BedCapacityModel.p.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
8. BedCapacityModel.p.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
9. BedCapacityModel.p.curUsingPTP
Definition

使用中負壓床-結核病-確定

Control1..1
Typeinteger
10. BedCapacityModel.p.curUsingPTS
Definition

使用中負壓床-結核病-疑似

Control1..1
Typeinteger
11. BedCapacityModel.p.curUsingPCP
Definition

使用中負壓床-新型流感-確定

Control1..1
Typeinteger
12. BedCapacityModel.p.curUsingPCS
Definition

使用中負壓床-新型流感-疑似

Control1..1
Typeinteger
13. BedCapacityModel.p.curUsingPNS
Definition

使用中負壓床-其他

Control1..1
Typeinteger
14. BedCapacityModel.p.rsvP
Definition

控留-負壓隔離病床

Control1..1
Typeinteger
15. BedCapacityModel.p.availP
Definition

可供使用-負壓隔離病床

Control1..1
Typeinteger
16. BedCapacityModel.n
Definition

一般隔離床

Control1..1
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. BedCapacityModel.n.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
18. BedCapacityModel.n.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on BedCapacityModel.n.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
19. BedCapacityModel.n.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
20. BedCapacityModel.n.curUsingNTP
Definition

使用中一般隔離床-結核病-確定

Control1..1
Typeinteger
21. BedCapacityModel.n.curUsingNTS
Definition

使用中一般隔離床-結核病-疑似

Control1..1
Typeinteger
22. BedCapacityModel.n.curUsingNCP
Definition

使用中一般隔離床-新型流感-確定

Control1..1
Typeinteger
23. BedCapacityModel.n.curUsingNCS
Definition

使用中一般隔離床-新型流感-疑似

Control1..1
Typeinteger
24. BedCapacityModel.n.curUsingNNS
Definition

使用中一般隔離床-其他

Control1..1
Typeinteger
25. BedCapacityModel.n.rsvN
Definition

控留-一般隔離病床

Control1..1
Typeinteger
26. BedCapacityModel.n.availN
Definition

可供使用-一般隔離病床

Control1..1
Typeinteger
27. BedCapacityModel.s
Definition

專責病床

Control0..1
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. BedCapacityModel.s.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
29. BedCapacityModel.s.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on BedCapacityModel.s.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
30. BedCapacityModel.s.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
31. BedCapacityModel.s.curUsingSTP
Definition

使用中專責病床-結核病-確定

Control1..1
Typeinteger
32. BedCapacityModel.s.curUsingSTS
Definition

使用中專責病床-結核病-疑似

Control1..1
Typeinteger
33. BedCapacityModel.s.curUsingSCP
Definition

使用中專責病床-新型流感-確定

Control1..1
Typeinteger
34. BedCapacityModel.s.curUsingSCS
Definition

使用中專責病床-新型流感-疑似

Control1..1
Typeinteger
35. BedCapacityModel.s.curUsingSNS
Definition

使用中專責病床-其他

Control1..1
Typeinteger
36. BedCapacityModel.s.rsvS
Definition

控留-專責病床

Control1..1
Typeinteger
37. BedCapacityModel.s.availS
Definition

可供使用-專責病床

Control1..1
Typeinteger
38. BedCapacityModel.icu
Definition

加護病房

Control0..1
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. BedCapacityModel.icu.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
40. BedCapacityModel.icu.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on BedCapacityModel.icu.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
41. BedCapacityModel.icu.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
42. BedCapacityModel.icu.curUsingICUTP
Definition

使用中加護病房-結核病-確定

Control1..1
Typeinteger
43. BedCapacityModel.icu.curUsingICUTS
Definition

使用中加護病房-結核病-疑似

Control1..1
Typeinteger
44. BedCapacityModel.icu.curUsingICUCP
Definition

使用中加護病房-新型流感-確定

Control1..1
Typeinteger
45. BedCapacityModel.icu.curUsingICUCS
Definition

使用中加護病房-新型流感-疑似

Control1..1
Typeinteger
46. BedCapacityModel.icu.curUsingICUNS
Definition

使用中加護病房-其他

Control1..1
Typeinteger
47. BedCapacityModel.icu.rsvICU
Definition

控留-加護病房

Control1..1
Typeinteger
48. BedCapacityModel.icu.availICU
Definition

可供使用-加護病房

Control1..1
Typeinteger
49. BedCapacityModel.note
Definition

備註說明

Control0..1
TypeNarrative
50. BedCapacityModel.lastUpdate
Definition

上傳日期時間

Control1..1
Typedate
51. BedCapacityModel.prsnId
Definition

上傳者

Control1..1
TypePractitioner